Paints & Solvents Checklist
-
Paints & Solvents - LOHP
The Labor Occupational Health Program (LOHP) at UC Berkeley developed toolbox talks and forms for 28 subject areas. You can access the introduction and reference sections in the "More like this" area and the other subjects by searching on 'LOHP'.
Summary Statement
A checklist for potential harmful effects of paints and solvents. Includes information such as hazard identification, training, work practices and PPE.Part of a collection. Click on the 'collection' button to access the other items.
1994
These tailgate/toolbox talks were developed for use under California OSHA regulations. The complete set is available from the Labor Occupational Health Program at UC Berkeley. For ordering information, visit the website (www.lohp.org) The American Conference of Government Industrial Hygienists (ACGIH) has adapted these talks to apply to federal OSHA regulations. To contact ACGIH, visit its web site (www.acgih.org). |
Date Prepared:_________________________ | By:_______________________ |
Project Name/No.______________________ | Location:__________________ |
- Check the box
if the statement is true.
- Fill in the blanks where the appears.
HAZARD IDENTIFICATION
- The company has
a written Injury and Illness Prevention Program (IIPP) that meets all
Cal/OSHA requirements. It includes identification of hazards from paints
or solvents on the site, regular inspections, accident investigation,
and correction of hazardous conditions. [1509]
- Air monitoring
has been done in work areas where exposure to vapors may exceed Cal/OSHA
permissible exposure limits (PELs) for specific toxic substances. [5155(e)]
- Workers have been
informed of the results of air monitoring performed on themselves, in
their work area, and/or for their trade. [3204(e)(2)(A)]
- If air monitoring found any exposure exceeding the PEL, engineering, administrative, and work practice changes are used to reduce exposure where possible. Personal protective equipment is used only if other measures are insufficient. [1528, 5141(a), and 5155(e)(2)]
HAZARD COMMUNICATION AND
TRAINING
- The company has
a written Hazard Communication Program. [5194]
- All workers have
received basic Hazard Communication training.
[5194]
- Everyone potentially
exposed to paints or solvents has received specific training in health
effects, safe use, minimizing exposure, personal protective equipment,
proper disposal, and emergency procedures. [1510 and 5194]
- All product containers
are properly labeled. [5194(b)(1) and 5417(a)]
- Material Safety
Data Sheets (MSDSs) are available on the site for all
paint and solvent products used. [5194]
- Workers know where
to find MSDSs and how to understand them. [5194]
- Personnel working in adjoining areas of the job site, including subcontractors, are aware of the work and the hazards. [1509]
WORK PRACTICES
- No sources of
ignition are present where flammable paints or solvents are in use or
drying. [1534(b) and 1935(a)]
- Ventilation is
sufficient to prevent dangerous concentrations of flammable vapors and
dangerous exposure to toxic fumes and vapors. [1531 and 5416(a)]
- Work practices
are used which minimize exposure to paints and solvents. [5141(b)]
- If paints or solvents
are used in confined spaces, there is a written confined space program
and all procedures are followed. [5156-5159]
- Workers dispensing flammable liquids use proper grounding and bonding procedures. [1934(b)]
PERSONAL PROTECTIVE EQUIPMENT
- If necessary,
personal protective equipment (PPE) is provided by the company and worn
by workers. The types used are appropriate for the work and give adequate
protection. [1514]
- Ventilation is adequate to reduce worker vapor exposure to a level below the Cal/OSHA permissible exposure limit (PEL). If not, appropriate respiratory protection is worn. [1531(a)]
Are respirators required when working with paints or solvents on this site? Yes____ No____ Type of respirator:______________________________________ Available at:___________________________________________ |
- Respirators are
properly stored and maintained. [1531(d)]
- The proper types of respirators and cartridges for the work are used. [1531(b)]
- Respirators, cartridges,
and replacement parts have been approved by the Mine Safety and Health
Administration (MSHA)
or the National Institute for Occupational Safety and Health (NIOSH).
[1531(b)]
- Workers who wear
respirators have been medically evaluated, fit-tested, and trained.
[1531(c) and (h)]
- If respirators
are used on the site, the company has a written Respiratory Protection
Program. [1531(f)]
- Impermeable gloves
of the correct type are worn to prevent skin contact with paints and
solvents, except where gloves might become caught in moving parts or
machinery. [1520] (To determine the appropriate glove for the substance,
consult the MSDS for the product, or contact the glove supplier or manufacturer.)
- Full protective
clothing (coveralls, etc.) is used to minimize skin contact where necessary.
[1522]
- Workers use chemical goggles (or equivalent eye and face protection) where there is risk of splashing or spraying into eyes. Eye and face protection meets the requirements of American National Standards Institute (ANSI) Z 87.1 1979, American National Standard Practice for Occupational and Educational Eye and Face Protection. [1516]
STORAGE AND TRANSPORT
- Paints and solvents
are stored in approved containers and areas. [1930]
- Containers are
kept closed when not in use. [1935(a)]
- Only closed containers
are used for transport or storage. [5417(e)]
- Incompatible chemical
products (which may cause a hazardous reaction if they come in contact)
are not stored together. [1549(g) and 1931(b)]
- Smoking is prohibited
in flammable liquid storage areas. [5543(c)]
- Flammable liquids
are not stored near sources of ignition (sparks, electricity, flames,
or hot objects). [1534(b) and 5543(c)]
- Where more than
25 gallons of flammable liquids are present in small containers, they
are kept in a storage cabinet approved by the National Fire Protection
Association (NFPA).
[1930(a)(4)]
- Indoor storage
areas for flammable liquids are ventilated and have one clear aisle,
at least three feet wide. [1931(e) and (f)]
- Flammable liquids
stored outdoors are at least 50 feet from the property line and 10 feet
from any public way. [1932(a)]
- Outdoor storage
areas are graded to divert possible spills away from buildings. [1932(b)]
- No flammable liquids are carried with explosives in vehicle cargo space. [1564(j)]
EMERGENCY EQUIPMENT
- Fire extinguishers of the proper type are readily available wherever flammable liquids are stored, transported, or used. [1922(a) and 1933]
Types
and locations of fire extinguishers on this site: _________________________________________________ _________________________________________________ |
- Emergency showers and eye wash stations are available on the site. [1512(f)]
CLEANUP AND DISPOSAL
- Appropriate cleanup
materials are available for leaks or spills. [1935(b) and 5192]
- Leftover products
and waste are properly stored, labeled, and disposed of according to
the instructions on the products MSDS. [1930 and 5192]
- Workers do not
use solvents to clean hands or clothes. [5155 and 5194]
- Flammable liquids
are not used to wash floors, walls, ceilings, structural members, furniture,
equipment, machines, or machine parts unless ventilation is provided.
[5417(b) and (d)]
- Flammable liquids are not sprayed for cleaning purposes, unless used (1) in a ventilated spray booth, or (2) outdoors in an open shed with no ignition source within 25 feet. [5417(c)]
GENERAL INSPECTION | |
Other Hazards Noted | Action |
Near
Miss Reports: |
|
Other: |