Search Results

965

Unsafe scaffolding incomplete planking, no guard rails, incomplete planking. Hammer left in an unsecured position can easily fall onto workers below....

952

All elevated work platforms at a minimum must comply with OSHA scaffolding standard. Entrance to building not protected from overhead hazards....

871

Any working surface used as a scaffold has to comply with OSHA scaffold standard. Scaffold is inadequately planked, no guard rails, no falling object...

872

Any walking working surface that is being used as a scaffold must comply with the OSHA scaffold regulations. Scaffold is inadequately planked, has no...

843

Unsafe, dangerous scaffolding. At a minimum scaffolds must comply with provisions of the OSHA scaffolding standard. Poor housekeeping a clean and orga...

829

Workers should have fall protection. Workers must be provided with fall protection either by eliminating the hazard, a passive fall protection system(...

808

Pump jack must have adequate support. Top rail not secure, mid rail toe boards missing. No protection at end of scaffold. Air gun attached to tool bel...

810

Competent person should supervise dismantling and erection of scaffolding. Workers have no fall protection, incomplete planking, overloading, unguarde...

820

Incompletely planked, cross bracing missing, no guard rails....

672

Worker mixing mortar may need respiratory protection. Scaffolding not fully planked. Scaffold also needs additional cross bracing....