Search Results

Construction bracing

This shows structural support that prevents collapses during construction....

Suspended Scaffold Outriggers

Suspended scaffolds systems must be designed by a qualified person and inspected daily by a competent person. The supports for the counterweight must...

Suspended scaffold

Suspended scaffold outrigger beams must have stops to prevent the hangers from sliding of the end of the outriggers. Wire rope supported must be desig...

Crane track lift

This is a crane lifting a crane crawler track. The worker is using a tagline to control the wide load. The crane signal "swing" is given by pointing t...

Aerial Lift Fall Harness use

Workers in extendable boom aerial lifts must wear fall harnesses to prevent falling out. Workers also need training in the proper use of the aerial li...

Three Tower Cranes

Whenever multiple tower cranes are used, there needs to be preplanning to ensure that the tower cranes cannot hit each other loads. This is accomplish...

Securing electrical cables

Electrical cables should be secured to prevent them hanging. This prevents workers from hitting the low hanging cable....

Warning Line System for Flat Roofing

Roofers can use a warning line system on flat roofs. This requires putting the safety flags at least six feet back. A safety monitor must be designate...

Scaffold Stair Tower

Setting up a scaffold stair tower allows workers to easily access the levels of a multi-story building. It is much safer than having workers climb lad...

Roofing Debris Chute

Roofing debris chutes are required at 20 feet. A good chute will have guardrail protection so that the worker is protected from falling off the edge....