Search Results

Roofing Debris Chute

Roofing debris chutes are required at 20 feet. A good chute will have guardrail protection so that the worker is protected from falling off the edge....

Do Not Operate Tag

Whenever a worker discovers equipment that is unsafe, they should place a Do Not Operate tag on it to warn of others of the dangers....

Putting on Electrical Gloves

This electrician is putting on his Class 0 electrical gloves to protect himself from a shock hazard. Class 0 gloves offer protection up to 1000 volts....

Overhead power line warning signs

Overhead power lines are often hit by equipment and result in many fatalities. Putting visible signs can alert the drive that they are near the lines....

Mast Climber Scaffold tie-in to wall

Mast Climber scaffolds have to be secured and tied into the wall per manufacturer's instruction....

Mast Climbing Scaffold with Guardrails

This mast climbing scaffold has guardrails used for fall protection. The scaffold is not overloaded per the manufacturer's instruction. The further aw...

Mast Climber Scaffold tie-in at top

Mast Climber scaffolds have to be secured and tied into the wall per manufacturer's instruction. This is showing the tie-in at the top....

Carpenter wearing PPE

This carpenter starts the job out right with safety glasses, hard hat, safety vest, and cut resistant gloves....

Scissor Lift Fall protection

This worker is using fall restraint in an aerial lift (scissor lift)...

Foundation Bracing

This is an engineered bracing for a foundation. There are vertical steel supports driven into the ground and horizontal wood support to hold the earth...